| Name
|
Our
product
|
Other
factories |
| Glass
|
| We adopt 5-6mm thick tempered glass, much more safe and durable |
|
Adopt 4-5mm thick tempered or ordinary glass.
|
|
| Material
|
| Adopt 5 ply composite board,good tenacity, to cause to curve
near 60°, the condition in solidity and durable . |
|
Adopt 3 ply thick Acryl, its very easy snap apart and only can cause
to curve be 50°, cannot use in durable.
|
|
| Tap
Valve
Core
|
| We adopt import ceramic valve core, capability at high or
low temperture and the life reaches 100 thousand times Adopt
1.2Pmassage ump, heat-radiate well. the power of massage is
strong. |
|
Adopt mechanisation valve cor , the life of valve core is shorter
than others Only adopt massage pump with 1 P, the power of massage
is weak, loud noise, the temperture will go up if working long time
.
|
|
| Pump
|
| Adopt 1.2Pmassage pump, heat-radiate well. the power of massage
is strong . |
|
Only adopt massage pump with 1P, the power of massage is weak,loud
noise, the temperture will go up if working long time. |
|
| Water-
proof
Ability
|
| Adopt original creation water-proof technology, (made with
aluminum alloy high-low basin design)effective prevent the water
spout out . |
|
Use glass glue or common mucus strip to prevent water,the acidity
of glass glue will canker electric plating part .after this,the water
will be seepage.
|
|
| Sliding
Door Design
|
| The door of steam house is sliding door , it is designed with
water-proof design ,no seepage. |
|
The door of steam house is folding ones, and occupies the space,
the connect with door part could be seepage and distorting.
|
|
| Appearance
|
| Our product is full utilizing the space, compared with other
factory, the space inside the steam house is large than other
factories product. |
|
The same specification,but small space inside steam house, the space
of massage bathtub also very narrow and limited, appearance design
only suit chinese.
|
|
| Electrical
|
| Made with double CPU and insurance ,the quality more reliable
. |
|
Others factories only use single CPU just to reduce the cost, it
is unreliabl , also increase the cost after sale.
|
|
| Function Of The Products
|
| Our products is multifunctional, it is simple to control,
more practical and reliabe. |
|
Other factory product are npracticability, many problem eXists in
telephone TV.ect., because of the water. also, will disturb by the
electric wave and increasing the cost of service.
|
|
| Installation
And Maintain
|
| We are adopting patent technology ,collecting all the functional
devices to be installed inside the lumium alloy column, which
makes installation and aintenance much more convenient, no necessary
to move the room body. |
|
Most of the electrical and water devices are installed on the back
of the body, quite difficult to maintain and repair.
|
|
| Packing
|
| As concerned packing, our product is separated into two parts
or more, easy to carry, save transportation space and freight. |
|
One piece packing, large volume, very difficult to carry and high
freight .
|
